Print Page | Close Window

ported box, 2 8" sundown SA-8 V2 spl

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=134123
Printed Date: April 24, 2024 at 2:54 AM


Topic: ported box, 2 8" sundown SA-8 V2 spl

Posted By: thor492001
Subject: ported box, 2 8" sundown SA-8 V2 spl
Date Posted: April 29, 2013 at 12:29 PM

i have 2 8" sundown SA-8 V2 spl's. they are in a 350Z, so the box has to stay kind of small.

I finished my box and i'm not overly happy with it. it's 23"wide x 8.75" tall x 16" deep, it has 1.5" square port (centered) that goes 13" deep/turns then another 4", it is only 3/4" from rear wall at the split. made of 3/4" MDF. by my figures it should be tuned to 30hz.

i was told that if you are spliting the port each direction, that you split the width in half at the rear wall. not sure if that is true.

problem is, they are pretty punchy. i had them in a bigger box (1.85cu) tuned to 36hz and they hit way harder and way deeper. i need some advice as to where i might have messed up. i know they are only 8" woofers, but i've heard them get deeper and think i should be able to get there again. any help would be awesome. i hope i supplied enough info.

posted_image posted_image




Replies:

Posted By: tonanzith
Date Posted: May 02, 2013 at 12:19 PM
Do you have bassbox pro?

-------------
Gary Sather




Posted By: thor492001
Date Posted: May 02, 2013 at 12:51 PM
yes i do





Print Page | Close Window