Print Page | Close Window

where i can get this done? etched plexiglass

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=136731
Printed Date: March 28, 2024 at 2:44 PM


Topic: where i can get this done? etched plexiglass

Posted By: fronzizzle
Subject: where i can get this done? etched plexiglass
Date Posted: May 31, 2014 at 9:35 PM

Hello all,

Back in January of 2010, I bought a Dodge Challenger, and shortly after made my own fiberglass speaker box. See attached. The guy I bought the speaker rings from also did the "Challenger" etched plexiglass for me. Unfortunately, I didn't keep good records and can't seem to find him.

I sold my Challenger and have bought a new car, I want to install this box in it but I'd like to get the plexiglass re-done. I'm hoping I can take the relevant measurements and provide it to someone, who can then make me a similar piece but with the new car name (Taurus SHO) on it. I tried Google and eBay, but wasn't able to find anyone. Any ideas?



Replies:

Posted By: fronzizzle
Date Posted: May 31, 2014 at 9:37 PM
Sorry, I didn't realize I wasn't able to post pictures. Basically, it is a panel (roughly 4" by 10") with the words "Challenger" and the Mopar M etched in it.




Posted By: tejarillo
Date Posted: January 09, 2015 at 6:13 PM
You can probably etched it yourself with a sand blaster idk if are thinking of the same outcome but it's worth a try.




Posted By: shark mobile
Date Posted: January 10, 2015 at 2:02 PM
Visit your local arts and craft store...they will often have etching kits for glass...which will likely work polymers like plexiglass...they will also have stencils etc...good luck

-------------
Solder, tape, repeat!





Print Page | Close Window