Print Page | Close Window

styrofoam for mold

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=13784
Printed Date: July 31, 2025 at 10:25 PM


Topic: styrofoam for mold

Posted By: acq810z
Subject: styrofoam for mold
Date Posted: May 20, 2003 at 10:40 PM

I am looking for large blocks of styrofoam to form a mold out of.  Does anyone know of a supplier. 

Thank

~Q




Replies:

Posted By: ir8st8
Date Posted: May 21, 2003 at 1:46 PM

how large? styrofoam melt from the resin..... try select products... they have a product called wonderfoam for sculpting and molding



-------------
"thats red to negitive and black to postive....... right?"



Posted By: audiomechanic
Date Posted: May 21, 2003 at 6:07 PM
you can go to a place that sells finerglass on more of an industrial scale and get 2 part foam. it comes in different densities the more the pound kit the harder it is. or you can buy sheets of foam. a 4 inch thick piece 18 inches x 8 feet is about $150. it is cheaper to get the 2 part foam and make it in to a sheet. the quart kit is about 30 dollars.

-------------


Print Page | Close Window