porting fiberglass
Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=14096
Printed Date: August 10, 2025 at 12:35 PM
Topic: porting fiberglass
Posted By: davywavy4186
Subject: porting fiberglass
Date Posted: May 28, 2003 at 12:23 AM
i was wondering if its possible to have a ported fiberglass instalatioin and if so how would u do it?
Replies:
Posted By: demeanor
Date Posted: June 02, 2003 at 9:46 AM
try going to www.alpine-usa.com then demo cars...then the blue civic with the ocean detail...go through the pics (around pg 5-13) they show how they got their rear subs ported trough to the front. this might not be the best tutorial, but it'll sure as heck give you a good idea on how to go about it by yourself.
good luck...it's no that difficult.
-------------
It's better to ask a "STUPID" question...than to know a "STUPID" answer. :-)
Posted By: audiomechanic
Date Posted: June 04, 2003 at 8:17 PM
it would be the same as building a MDF box.
you just have to do a little guess work on the sixe at first. then once you get the actual volume of the box you can make any adjustments to the port if needed.
if you want i can send a pic or 2 of a couple ported boxes we have built at the shop.
-------------
|