Subwoofer ring support
Printed From: the12volt.comForum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=143352
Printed Date: May 03, 2025 at 12:25 AM
Topic: Subwoofer ring support
Posted By: rauenpc2
Subject: Subwoofer ring support
Date Posted: July 10, 2017 at 4:22 PM
This may be a dumb question, and it may have been answered already and I just didn't see it. With a fiberglass enclosure where the speaker ring is essentially two rings - one that goes around the subwoofer, and the other that you actually mount the subwoofer to (see picture), all the tutorials seem to have no support for the rings beyond what is needed to stretch the fleece over this. From there, the only thing holding the rings in place is the resin that hits the top of the outer ring through the fleece. Is this really enough to withstand the weight and vibration from a subwoofer and not cause it to separate from the fiberglass?
