Fiberglass Beginner
Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=143680
Printed Date: April 25, 2024 at 4:54 PM
Topic: Fiberglass Beginner
Posted By: quarinteen
Subject: Fiberglass Beginner
Date Posted: October 27, 2017 at 5:12 PM
Hello, I am looking for some information. I want to attempt to make a fairing for a motorcycle out of fiberglass. I understand how I believe but I need information on how to make the mold or more where to get the right foam for the mold that will be large enough. Can anyone assist on what the best way to make a mold is? If something is better than foam please let me know. Thank you.
Replies:
Posted By: shark mobile
Date Posted: November 11, 2017 at 8:43 PM
Any boat supply place will have access to fibreglass foam. These places sell resin and gel coat and typically everything you will ever need to build your mold.
Some really great videos on YouTube...too many details to explain the process on here.
-------------
Solder, tape, repeat!
|