Print Page | Close Window

Mounting Brackets on Underside of Panel?

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=145271
Printed Date: October 05, 2022 at 7:03 PM


Topic: Mounting Brackets on Underside of Panel?

Posted By: thisname
Subject: Mounting Brackets on Underside of Panel?
Date Posted: March 03, 2019 at 5:25 PM

So I'm fairly new to fiberglass so this still may be above my experience level but for mounting brackets on a panel to connect to the vehicle I have no clue how I would replicate something like this. My best guess would be chop it off the original and JBweld it or something similar. I wanted to know if any of yoose would know how to go about doing something like this.

posted_image






Print Page | Close Window