Print Page | Close Window

leak

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=15976
Printed Date: July 18, 2025 at 5:28 AM


Topic: leak

Posted By: Rjahr01
Subject: leak
Date Posted: July 07, 2003 at 6:55 AM

After i made a mold of my trunk i stretched my fleece over and started to fiberglass my box... the only problem is now i have done the entire box and i filled it up with some water to make sure it was all sealed and i found out that i have some leaks. The leaks are all where the the fleece touches the formed glass...is their anything to solve this or do i just have to keep laying more fiberglass to the inside untill it seals itself....Thanks in advance



Replies:

Posted By: iaudio
Date Posted: July 07, 2003 at 7:25 PM
you could try puting some polyester resin in there by itself and swishing it around.

-------------


Print Page | Close Window