Print Page | Close Window

Fiberglass Sub Box for truck

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=15990
Printed Date: July 17, 2025 at 2:14 AM


Topic: Fiberglass Sub Box for truck

Posted By: WAVRYDER23
Subject: Fiberglass Sub Box for truck
Date Posted: July 07, 2003 at 11:10 AM

Hey,

I have a ext. cab truck and wanted to build a fiberglass box underneath the back seat. My one main question is I am making the bottom and the sides out of glass but the top and front are going to be made of MDF. How do I join the MDF and Fiberglass together to make a air tight seal between the two? And also is this the best way to make the box? I need to fit 4 kicker comp vr's underneath.

Thanks,

Jacob



-------------
THANKS,
JACOB



Replies:

Posted By: Rjahr01
Date Posted: July 07, 2003 at 12:23 PM
once fiberglass and resin bonds with mdf it will make a tight seal..but i think i would recomment putting a sealand on all seams anywyas...thats what i'm going to do....also if you had a pic of your cab i could help youplan the box a little better.. i just started my box and it looks great except its leaking a little bit so i need to patch up all holes...kinda fun to work with at the begining but then it becomes a bitch


Print Page | Close Window