Fiber glass panels
Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=16245
Printed Date: July 19, 2025 at 4:36 PM
Topic: Fiber glass panels
Posted By: TremaineG
Subject: Fiber glass panels
Date Posted: July 13, 2003 at 12:43 PM
I wanted to know, if i make side panel to go around the sides of my trunck how do i make them stay, stick of snap in place? I always see pictures of installs that have panels in but i never see how they stay on.....HELP!!!
-------------
Tremaine
Replies:
Posted By: Rjahr01
Date Posted: July 13, 2003 at 1:43 PM
you could use snap fasteners.. you can get them at any auto store and what you do is secure them to your fiberglass panel and then drill a smaller hole on the panel you want to fasten it to..and simply push in..just like how your door panel stays attached to your door.
Posted By: audiomechanic
Date Posted: July 23, 2003 at 8:25 PM
they should pressure fit in place pretty well, especially if they are mated up to another panel or enclosure. depending on how the panel is made and what is on it and how it is finished(paint,vinyl,carpet) you can make an insert to hide the mount, mount it behind a fuse block or something that is mounted on it.
-------------
|