Print Page | Close Window

Cylinder Enclosure

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=17705
Printed Date: July 20, 2025 at 7:21 AM


Topic: Cylinder Enclosure

Posted By: allchromed01r1
Subject: Cylinder Enclosure
Date Posted: August 17, 2003 at 8:53 AM

Im making 3 cylinders for 3 10" subs.  The diameter is going to be 12 inches and the length is 14 inches.  I was hoping somebody could give me a recommendation on how many layers of glass would be adequate for good strength.  Thank you



Replies:

Posted By: pureRF
Date Posted: August 17, 2003 at 1:48 PM
https://www.shopmaninc.com/ and get some coremat the 2 one and do one layer of that. do about 3 layers of fiber mat then 1 coremat layer then 3 layers of fibermat and u will have an extreamly strong enclosure

-------------
dream it, build it, fiberglass it


Print Page | Close Window