Custom Kick Panel

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=18134
Printed Date: July 13, 2025 at 11:29 PM

Topic: Custom Kick Panel

Posted By: NT2BFKWIT
Subject: Custom Kick Panel
Date Posted: August 26, 2003 at 10:38 PM

How do you over come the fact on the driver side of my Expedition, the emerg. brake would not be able to engage all the way with 6.5 speakers on the side of it.

Replies:

Posted By: radioactive
Date Posted: August 31, 2003 at 12:56 AM

in my opinion i wouldn't place a kick panel there and interfere with your ebrake. not sure of how large expedition door panels are if so you could add another 6.5 there.

-------------
"The important thing is not to stop questioning"

Posted By: lil_mikey
Date Posted: August 31, 2003 at 5:14 PM

Not a wise idea to put the kik panels right were the e-brake is..

buddy did it.. needed to use his e-brake.. had to rip the kik panel off and smash the speakers to use it.. So not fun

-------------

Posted By: NT2BFKWIT
Date Posted: September 01, 2003 at 11:59 PM

Yeah, I'm thinking the same thing. I'll just reconstruct my doors. There's plenty of room.

Thanks for the input guys

Posted By: lil_mikey
Date Posted: September 02, 2003 at 9:15 AM

Best of luck dood..

I say mount them higher up on the doors.. Be different then every1 else.. i took my Deck and hooked it up to the side of my drivers door instead of the cneter console.. Sooo crazy looking.

-------------

Print Page | Close Window