Print Page | Close Window

Help to build a SW enclosure in rear seat

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=19520
Printed Date: July 23, 2025 at 9:01 AM


Topic: Help to build a SW enclosure in rear seat

Posted By: mentor561
Subject: Help to build a SW enclosure in rear seat
Date Posted: September 30, 2003 at 7:45 PM

Hi all,

I am new to the 12volt.com and to fiberglass. I really need some help and advice. What I want to do is remove my back seat and put 2 subs requiring .75 cf  each in there. How should I go about doing this ?

For the background I have a 99 mitsu eclipse Spyder (the convertible). I already have a custom amp rack built out of MDF that goes in the place of the rear seat up/back rest. It is a very flush fit and very stealth. I would like to use the bottom seat wells and another 4 inches above to enclose my sub.

Any help would be very higly appreciated.

Thanks,

Jeff




Replies:

Posted By: exxxotic audio
Date Posted: October 01, 2003 at 1:58 PM
      try going to this site to get some ideas it is club3G  they are all about eclipse


Print Page | Close Window