joining two molds
Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=19921
Printed Date: July 19, 2025 at 2:37 PM
Topic: joining two molds
Posted By: Ketel22
Subject: joining two molds
Date Posted: October 10, 2003 at 3:50 PM
if i where to make two molds one for each side of a enclsure and joined them whould it have the same structral intregerity as if i made one mold and built onto it. also what would the best way to join them be.
-------------
Quad L Handyman services
Replies:
Posted By: Velocity Motors
Date Posted: October 10, 2003 at 4:38 PM
It would be easier to make a single mold with a divider than two separate molds and then trying to connect then afterwards. What is it that your trying to do ?
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: Ketel22
Date Posted: October 10, 2003 at 5:34 PM
well if possible i want to take a fiberglass mold of my seat and join it with the mold ill have from the back of my truck and take the seat out and put in place the fiberglass "seat" that will house my subs.
-------------
Quad L Handyman services
|