Fiberglassing wheel well

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=20774
Printed Date: July 13, 2025 at 11:31 PM

Topic: Fiberglassing wheel well

Posted By: fareedb
Subject: Fiberglassing wheel well
Date Posted: October 30, 2003 at 3:39 PM

I am very new to this fiberglassing concept, and this is my first time posting on this site but let me first congratulate all involved in this site for a job well done. This is my dilema. I would like to create a Sub box in the wheel well area to house two 12" alpine SWR-1241D that require between 0.7-1 ft^3 each of volume. How would I go about building a fiberglass enclosure in the wheel well creating an enclosure that has two separate units for each Sub thereby given the required volume and getting maximum performance. I am planning to do this in a Nissan Sentra 2004.

Replies:

Posted By: kustomcarluvr
Date Posted: October 30, 2003 at 5:24 PM

Hey, go here https://www.geocities.com/MotorCity/7165/how_to_1.htm this guy did really well with the instructions and layout. Then I would just add a piece of 3/4 MDF in the center to seperate the 2 sides as well.

Matt

Posted By: Ketel22
Date Posted: October 30, 2003 at 9:03 PM

i would suggest a larger space for those subs, more like 1.25cu ft or 1.5cu ft

-------------
Quad L Handyman services