How would one go about creating Screen

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=21113
Printed Date: July 09, 2025 at 8:34 PM

Topic: How would one go about creating Screen

Posted By: gabe8496
Subject: How would one go about creating Screen
Date Posted: November 07, 2003 at 7:21 AM

Something that looks similar to this:

I have made your basic kickpanels, pods on door panels but when it comes to incorporating a tv screen, how can one be mad to mount like this?

Would I just create like a baffle out of mdf, cut to fit the screen and then once it is fiberglassed, lay the screen in? If so, what method would be the best way to hold it down to the mold?

-------------
-Gabe

Replies:

Posted By: Ketel22
Date Posted: November 08, 2003 at 12:33 AM

all i gotta say is wow thats sexy

-------------
Quad L Handyman services

Posted By: Velocity Motors
Date Posted: November 08, 2003 at 12:46 AM

I would take MDF trim around the screen and then fiberglass the trim into the rest of the molding ( just like a sub ring ).

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: soup
Date Posted: November 08, 2003 at 6:41 AM

https://www.mobiledynamics.com/main/toronto/pages/screeninstall.html

do it very similar to this. I know this is a seat rest, but it would work on the same principle. I would do all the fiberglassing, and as you are fiberglassing, use some mdf covered in release agent. Cut the mdf to the exact size of the screen, pit it on the mold where you want the screen, and that way when done, you will have a hole there to fit the screen. mount the screen, attach the bezel, and yo uare done.

Print Page | Close Window