Print Page | Close Window

routher bits

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=22189
Printed Date: July 27, 2025 at 7:14 AM


Topic: routher bits

Posted By: SPS70129
Subject: routher bits
Date Posted: December 01, 2003 at 2:35 PM

Just curious about what type and brand of routher bits do you guys use to cut out the rings for a fiberglass box?



Replies:

Posted By: iaudio
Date Posted: December 01, 2003 at 8:07 PM
I use an Amana solid carbide spiral upcut bit.

-------------



Posted By: HamiltonAudio
Date Posted: December 10, 2003 at 7:57 PM

using a suitable circle cutting jig, a 1/4" straight cut bit whips thru mdf like cheescake with a good router.

b




Posted By: jakita
Date Posted: December 21, 2003 at 7:30 PM
Make sure to wipe blades off with alcohol after each cut to get rid of any residue to extend the life of your expensive bit


Print Page | Close Window