Print Page | Close Window

Two pieces, one box

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=22321
Printed Date: July 26, 2025 at 5:58 PM


Topic: Two pieces, one box

Posted By: GMC4x4Guy
Subject: Two pieces, one box
Date Posted: December 04, 2003 at 4:57 AM

I'm making a fiberglass box in the cargo area of my wifes SUV. I molded one piece to fit the plastic side and floor. Now, I'm going to add MDF for the speaker to bolt to and some fleece to form the front. The question is, how do I fasten the fleece to the fiberglass mold I've created while I lay on the fiberglass for the front? Hot glue, super glue, staples? Thanks.

-------------
"Drive it like you stole it"



Replies:

Posted By: kustomcarluvr
Date Posted: December 04, 2003 at 9:16 AM

Hot glue.

Matt




Posted By: pureRF
Date Posted: December 05, 2003 at 6:15 PM
Use hot glue, and after you glass the fleece you can sand and peel the back fleece off the mold.

-------------
dream it, build it, fiberglass it


Print Page | Close Window