Print Page | Close Window

newbie fiberglass projects done

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=22580
Printed Date: July 23, 2025 at 8:29 AM


Topic: newbie fiberglass projects done

Posted By: interfire83
Subject: newbie fiberglass projects done
Date Posted: December 08, 2003 at 11:23 PM

my first project I made a box for 2 10" Alpine woofers w/ a spot for an Alpine amp. it turned out a little wavy. i think that was b/c of the thin walmart fabric i used.  My lastest project was a rear deck for my friends Nissan Sentra. I'd rather experiment on other peoples cars before I do mine. this one turned out much better than the box b/c I used select products mold cloth. Thank god it fits perfect. It is going to hold a Fusion Jonah Lomu componet system. Take a look for yourself. Let me know what you think and how to better myself. Neither of these projects are completed but my part is done. I'll leave the painting to the body shop.

https://www.cardomain.com/memberpage/379022/2




Replies:

Posted By: no ka oi
Date Posted: December 09, 2003 at 2:38 PM

what did you use to make the mold for the alpine box (im assuming that that is the red one in the pictures)?  Its got a nice design--i really like it.



-------------
if you dont know how to fix it right, just fake it


Print Page | Close Window