door pannels
Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=23166
Printed Date: July 20, 2025 at 4:34 AM
Topic: door pannels
Posted By: hbk00
Subject: door pannels
Date Posted: December 21, 2003 at 7:55 PM
just looking for some ideas I'm having a hell of a brain fart, I'm fiber glassing my door pannels actually I've just glassed the first layer of fleece allready but my question is what else can I do to spice em up a little bit, because just fiberglassed makes them look really plain! I have kicks allready so making a mid housing is kind of out of the equation. I thought of "flames" or "tribal" but I'm not quite sure how to do it, would I just cut them out of 3/4" mdf screw them to the pannel and glass over them, is that how stuff like that is done? Any ideas or suggestions to do up these door pannels would be apreciated! Thanks in advance!
-------------
go custom or go home!!
Replies:
Posted By: jakita
Date Posted: December 21, 2003 at 8:46 PM
Router some aluminum is cool. LED footlamps can be cool or cheesy depending on how you do it. Another thing to do since you dont have speakers in the door is to make a storage compartment since you dont have to worry about rattles. Well let me know what you figure out. Also what knid of car is it? I hate it when people go custom and it does not match the cars interior at all.
|