Spraygun for painting boxes
Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=24470
Printed Date: May 02, 2024 at 9:41 PM
Topic: Spraygun for painting boxes
Posted By: bsshep01
Subject: Spraygun for painting boxes
Date Posted: January 12, 2004 at 10:05 PM
What is a good affordable spraygun(s) for doing primer, basecoat, clearcoat on glassed boxes?
Replies:
Posted By: audiomechanic
Date Posted: January 17, 2004 at 7:37 PM
depending on what you deem affordable, you can get a porter cable gun with a 1.4mm tip at lowes for about $70.
if you want a good gun you can get a DeVilbiss for about 285 online ........... https://www.toolparadise.com/
another place you can go is harbor freight. they have decent guns there too.
Trevor
-------------
Posted By: ECLIPT9
Date Posted: January 18, 2004 at 10:05 PM
i'd go with a Sata Cobalt. high quality body shop approved for about $170. good overall gun. don't buy cheap guns. they are like headunits.
-------------
okay
Posted By: audiomechanic
Date Posted: January 18, 2004 at 11:24 PM
i'm not saying that i am the best painter in the world, or that i have been doin it for half my life. but i have noticed that for the most part you can get a way with an inexpensive gun for most applications except the clear coat. it is MUCH easier to get a finish with a good gun. but for primers, especially poly primer i use a cheaper gun. i have a good gun for base and clear.
you can achieve a good looking finish with an inexpensive gun tho. it might just take a bit more practice. i have had really good results with cheaper guns before i got me devilbis.
Trevor
-------------
|