is it hard to build fiberglass enclosure

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=24785
Printed Date: May 15, 2025 at 7:16 PM

Topic: is it hard to build fiberglass enclosure

Posted By: skylark
Subject: is it hard to build fiberglass enclosure
Date Posted: January 17, 2004 at 8:56 PM

i have never worked with fiberglass but i have bondo up an car panel even if its my first time how could i do it or do i need PROFESSIONAL HELP

-------------
goingcrazyonsound

Replies:

Posted By: auex
Date Posted: January 17, 2004 at 10:27 PM

I wouldn't call it hard, just time consuming. If you search through this forum there are a couple of "how-to's" here.

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Posted By: skylark
Date Posted: January 19, 2004 at 12:58 AM

ya i went thru and got every thing i need thanks

-------------
goingcrazyonsound

Posted By: Gumbya4
Date Posted: January 19, 2004 at 12:46 PM

skylark wrote:

ya i went thru and got every thing i need thanks

I just did my first box last weekend(that sounds bad) and it was pretty easy(bad there too). Like he said it is very tedious. Just make sure that you mix the resign correctly. I only put half the hardener in. I was able to "fix" it but I am going to start over. Make sure you thoughly think the design out. I thought that I had a good design but I made changes to the second box.

Good luck.

-------------
„h "Simplicity is the ultimate sophistication." Leonardo da Vinci (1452-1519)