I am looking for info on hiding the mounting points for my amp rack. The amp rack will be mostly MDF and finnished with figer glass. I have the PG Limited Edition Octane amp, there are 4 mounting points on the sides of the amp. My goal is to completely hid the screws holding the amp down. thanks for all the help you can provide...diagrams are very helpful for me! thanks!
-------------
PG Limited Edition Octane Aplifier
PG Ti400.2
(2) JL12w6v2
Focal 165KF
JL TR-690TXi
Sony XAV-7W
Sony 10 Disc MP3 Changer
X-box
APC 350W inverter
Monster 1/0
Irragi 180A Alternator
most of the time it is dome with cover panels, or trims of some sort. it is kinda hard to give any suggestions without seeing what you have and how you have it finished...............could you put some pics somewhere and we can take a look and make suggestions? thanks
Trevor
-------------
Thanks Trevor,
I am still working on the amp rack, but I do have pics of the amp:
https://www.sounddomain.com/memberpage/410609/4
The rack that I am building will be roughly wedge shape so that the amp is on dsplay when the trunk is open, underneath there wil be a hollow cavity concealing a xbox, power inverter and possibly another amp in the future. this cavity wil have 2 12v fans puhing air to cool the concealed components. The rack is being built out of mdf andwil be finished in painted fberglass. sorry I do not have any pics of the rack in progress, it is still on the drawing board. thanks for your input.
~Alvin
-------------
PG Limited Edition Octane Aplifier
PG Ti400.2
(2) JL12w6v2
Focal 165KF
JL TR-690TXi
Sony XAV-7W
Sony 10 Disc MP3 Changer
X-box
APC 350W inverter
Monster 1/0
Irragi 180A Alternator