fiberglassing question
Printed From: the12volt.comForum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=25917
Printed Date: May 24, 2025 at 11:29 PM
Topic: fiberglassing question
Posted By: Supa lao
Subject: fiberglassing question
Date Posted: February 05, 2004 at 8:53 PM
I've been trying to do some research for my 1st fiberglassing. I found a website(https://www.hzemall.com/), in which I'll use his pictures as a reference. I understand you need to build a base, like this:
Then you stretch fleece or speaker cloth over it like so:
In the pic above, it looks like he makes additional rings and screws them down. You then put resin on it like so:
final outcome is this:
The part I have a question is, when you put resin on the outter ring that he screws down. Does he pry off the ring? Also, how does he fleece stay there when he takes the ring off, because he didn't put any resin under the ring? Would it just stay there because there is resin on the outside of the ring?
Replies:
Posted By: Supa lao
Date Posted: February 05, 2004 at 8:56 PM
Posted By: audiomechanic
Date Posted: February 08, 2004 at 2:59 PM