Chambers in fiberglass box

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=26220
Printed Date: May 13, 2025 at 11:00 PM

Topic: Chambers in fiberglass box

Posted By: hartman
Subject: Chambers in fiberglass box
Date Posted: February 10, 2004 at 1:08 PM

I'm making a fiberglass box for 3 12s, but it has an MDF subframe. My question is, should I make 3 chambers for each of the subs, or just leave the space open to all the airspace? I ask because my box is going to have a fair amount of curves in it, and making chambers for each sub will be a challenge.

Hartman

Replies:

Posted By: pureRF
Date Posted: February 10, 2004 at 3:26 PM

If possible do it if not then you should be fine, just reinforce it more

-------------
dream it, build it, fiberglass it

Posted By: hartman
Date Posted: February 11, 2004 at 4:17 PM

Ok, will it effect the performance any if I don't put chambers in?

Posted By: pureRF
Date Posted: February 11, 2004 at 4:44 PM

no make sure the volume is right and u dont blow a sub or nething cause one blown sub will obviously mess up the sound of all the subs

-------------
dream it, build it, fiberglass it

Print Page | Close Window