Print Page | Close Window

91 Acura Sub-Box

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=26447
Printed Date: May 11, 2025 at 9:57 PM


Topic: 91 Acura Sub-Box

Posted By: KosmoSuVinitta
Subject: 91 Acura Sub-Box
Date Posted: February 14, 2004 at 3:44 AM

Hey everyone, I've been reading the forum for a little while and trying to gather as much information as I can before I get to work on the box I am going to build for my car, and I still have a couple of questions, so here goes.

I'm going to need a box that will hold two 15" subs for the trunk of my 91 acura, and I'm curious what kind of matting would be best for this? I don't fully understand the differences between varying thickness' and what sort of hardener to use with it.

Also, if anyone knows what size box I should have for dual 15" AudioBahn Flame compression subs, it would be much helpful. I had a friend working on it for a while and he could never figure it out.

Any suggestions would be much appreciated.



-------------
If ignorance is bliss, is understanding pain?



Replies:

Posted By: S.I.Autosports
Date Posted: February 15, 2004 at 4:49 AM
do you have any of the specs for the subs?  if you buy the resin it usually coms with hardener.  if not you can use MEKP. 




Print Page | Close Window