enclosure volume
Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=26597
Printed Date: May 23, 2024 at 4:59 AM
Topic: enclosure volume
Posted By: satchmoe27
Subject: enclosure volume
Date Posted: February 16, 2004 at 7:46 PM
I am about to build a fiberglass box in my nissan Altima and I was wondering if their was a way to pre-determine the volume of the enclosure. The sub that I am using works best with a sealed 1.0 cubic ft box. I measured the area that i wanted to use and it was 20" by 24".
-------------
screamon deamon
Replies:
Posted By: audiomechanic
Date Posted: February 16, 2004 at 9:26 PM
you more or less take a guess at it to start......then after the foundation is glassed you can take a more accurate measurement. the easiest way is to kinda predend it is a square and see if you have the room.........then when you glass it...just glass a little more than you think you will need.......you can always cut it down or add to it if you need to.
-------------
Posted By: S.I.Autosports
Date Posted: February 17, 2004 at 4:51 AM
What shape do you plan on making the enclosure?
|