Print Page | Close Window

First fiberglass box

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=26872
Printed Date: June 08, 2024 at 12:21 AM


Topic: First fiberglass box

Posted By: mtspawn
Subject: First fiberglass box
Date Posted: February 20, 2004 at 9:34 PM

I want to make a fiberglass enclosure in the trunk of my 02 grandam gt.  Ive been doing to some research and think i got the main idea of how to do it.  I some question that i not sure on how to go about doing it.  there are some really weird curves in the trunk and i want to lay out some wood to form it whats the easiest way to draw it out???



Replies:

Posted By: 93accordSE
Date Posted: February 20, 2004 at 10:11 PM

If the trunk has a trunk liner, or carpet, take that out and trace it. But it probably doesn't cause its a new model, so your best bet would be using cardboard and scissors. I am going to be putting MDF on the floor of my trunk soon and luckily my trunk has a trunk liner so it should be easy, I am gonna make some fiberglass panels that will hold a 10" speaker behind each taillight, i might just take off the whole right and left panels that are on there now and just make new custom fiberglass ones and clearcoat it grey/black. Good luck, i wanna see i when its done.



-------------


Print Page | Close Window