need some help
Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=27082
Printed Date: May 13, 2024 at 4:07 PM
Topic: need some help
Posted By: pureRF
Subject: need some help
Date Posted: February 23, 2004 at 9:15 PM
Im looking at doing a box with the subs being inside the mold, like the subs dont "pop" out they are recessed. ok go to this link click and see how (from top to bottom) the pics 6,7,8 all have a MDF ring on top of the ring the fleece was streched over? Holding down the fleece to the ring. but then in 11 and 14 the rings seem not to be there? Are the rings still there in pics 11 and 14 or do they remove them after the fleece is soaked in resin? This seems like it would be perfect to do what i need to do so hope somone knows how to do this. thanks ------------- dream it, build it, fiberglass it
Replies:
Posted By: hiddnen
Date Posted: February 23, 2004 at 9:59 PM
yes it look likes there is a 2nd ring along with mounts over all the other pieces that were wrapped in fleece. i think they may have took off the added rings off after soacking in resin...or they sanded them down or something...cant really tell. very clean install though. i like how they hide the wires with the inverted sub.
-------------
aim and yahoo: hiddnen
msn: bonds_big_fan@hotmail.com
email: hidden_ghost_03@mchsi.com
Posted By: PATPJRICK
Date Posted: February 23, 2004 at 10:01 PM
it appears that what they did was pull the fleece over the rings in the MDF box glassed it then added a second ring on top of the rings that were just glassed....it appears they did the same thing wit the amp rack where the amps are mounted
Posted By: pureRF
Date Posted: February 24, 2004 at 7:08 PM
oops i kinda forgot to ask my main ?. Does anyone know how they did this? Did they put a release agent on the ring or something? also, wouldnt the resin underneath the ring on top of the fleece block the resin from getting to the under ring?
thanks
-------------
dream it, build it, fiberglass it
Posted By: PATPJRICK
Date Posted: February 24, 2004 at 9:18 PM
Posted By: hiddnen
Date Posted: February 24, 2004 at 10:07 PM
ya but those arent flush mount rings in that install... have u tried contacting the people?
-------------
aim and yahoo: hiddnen
msn: bonds_big_fan@hotmail.com
email: hidden_ghost_03@mchsi.com
Posted By: pureRF
Date Posted: February 25, 2004 at 7:59 PM
lol thanks pat but i know how to do a reg glass box. Hiddnen i did contact them last night and just got the email back. They said they just loaded on a release agent and screwed on the top ring glasses took off the top ring glassed under it then screwed it back in then let it dry then took it off. I'll try to get pics up when its all done. Its gonna be 2 15 Eclipse aluminums with 2 Alpine mrd-m500s
-------------
dream it, build it, fiberglass it
|