what doesn’t stick to fiberglass?

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=27528
Printed Date: July 22, 2025 at 4:23 AM

Topic: what doesn’t stick to fiberglass?

Posted By: turbopseidon
Subject: what doesn’t stick to fiberglass?
Date Posted: March 01, 2004 at 5:11 PM

im just looking for ideas of what I can use over a shape that won't stick...I have heard a couple but looking for the easiest...like a release agent like wax or tinfoil I heard but I just want to keep what I am molding around for sticking to it thanxs..

Replies:

Posted By: audiomechanic
Date Posted: March 01, 2004 at 5:57 PM

if understood what you wrote right......you want it to stick in some places, but not others..........it that is the case, you can use clear packing tape. that way it can be applied to the area, then cut to shape if needed. i havent seen a case where resin has stuck to it yet.

-------------

Posted By: 93accordSE
Date Posted: March 01, 2004 at 7:32 PM

You can also use Pam or any cheap immitation.

-------------

Posted By: pureRF
Date Posted: March 01, 2004 at 9:51 PM

i think tinfoil and adhesive spray works great

-------------
dream it, build it, fiberglass it

Print Page | Close Window