how do i make a fiberglass center console

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=27651
Printed Date: May 15, 2024 at 3:53 AM

Topic: how do i make a fiberglass center console

Posted By: its_chevy_baby
Subject: how do i make a fiberglass center console
Date Posted: March 03, 2004 at 10:09 AM

I am trying to figure how to make a new center console for my s-10 and i wanted to make it out of fiberglass but i dont know what i need and how to make it

-------------
[]D[][]V[][]D

Replies:

Posted By: drvnbysound
Date Posted: March 03, 2004 at 10:25 AM

What materials you need will really depend on the actual design you are trying to accomplish. What are you trying to accomplish/gain with the custom console?

-------------

Posted By: Thack79
Date Posted: March 03, 2004 at 1:03 PM

There are alot of old post on this website. If you search "fiberglass" and "console" you will find alot. This site helped me https://web.njit.edu/~cas1383/proj/main/

Hope it helps to give you some ideas.

Posted By: its_chevy_baby
Date Posted: March 04, 2004 at 9:14 AM

well i am trying to make a console that goes in between my seats and goes all the way back behind my seats kinda forming a "T" but there are going to be a lot of curves and certain parts that pop out it is going to be a very complex design. i was planning on making a model out of cardboard then filling in with some foam and so forth but i dont know what i need to finish it with fiberglass.

-------------
[]D[][]V[][]D

Print Page | Close Window