jasper 200 circle guide

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=28057
Printed Date: July 21, 2025 at 5:28 PM

Topic: jasper 200 circle guide

Posted By: Supa lao
Subject: jasper 200 circle guide
Date Posted: March 09, 2004 at 1:16 PM

I just got my jasper 200 circle guide and my sears craftsman router. But looking at the instructions on how to mount it has me a little confused. Is the finished router suppose to look like this:
posted_image

and

posted_image

My question is, when I have the router flipped, I can't see the markings on the circle guide. I can't flip the circle guide over, b/c the screws will be protruding from it. Am I suppose to put the plastic base of the router back on? If someone has a pic they can show me of how it's suppose to look like, that'll be great.

Thanks :)

Replies:

Posted By: 93accordSE
Date Posted: March 11, 2004 at 10:28 PM

That looks like a nice router, how much was all of it, router and guide?

-------------

Posted By: NowYaKnow
Date Posted: March 11, 2004 at 10:34 PM

Yes that is how the finished router is supposed to look. Doesn't make much difference what side the markings are on just pick the hole you want and go for it.. Stick a small nail through it so you don't loose your place and flip the router. No big deal.. Good luck,

Mike

Posted By: Supa lao
Date Posted: March 11, 2004 at 11:33 PM

Sweet, thanks. I just wanted to get everything out and put together so I can get an idea of how it works and stuff. I got the router from Sears, it's a Craftsman Plunge Router (model number 917515)and I got it for around $70 then I got 10% off of that for being a craftsman club member. I got the jasper circle making guide from www.partsexpress.com for $40