Print Page | Close Window

Door panel

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=28461
Printed Date: May 28, 2024 at 1:15 PM


Topic: Door panel

Posted By: larrry29
Subject: Door panel
Date Posted: March 16, 2004 at 6:17 AM

I have a 96 Geo Metro,

  I want to install power door locks, what is the easiest way to get the door panel off?

I have never taken door panels off and wasn’t sure if there is anything I should be careful with, what is the best procedure on getting the panel off?

        Thanks,




Replies:

Posted By: larrry29
Date Posted: March 16, 2004 at 6:44 AM

I have a 96 Geo Metro, want to install power door locks, what is the easiest way to get the door panel off?  I have never taken door panels off and wasn’t sure if there is anything I should be careful with, what is the best procedure on getting the panel off?




Posted By: 93accordSE
Date Posted: March 16, 2004 at 8:53 AM
Make sure you have all the screws out and pop it off carefully, there are alot of hidden screws in door panels so if it isnt coming off look for a possible screw. Also you have to pop off the handle lever so don't pull on it too hard.

-------------


Print Page | Close Window