f/g box for tens
Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=29092
Printed Date: May 23, 2024 at 8:01 AM
Topic: f/g box for tens
Posted By: Csr
Subject: f/g box for tens
Date Posted: March 26, 2004 at 11:28 PM
ive heard that fg is weak over long straight lengths well how long is too long?
-------------
Imitation is the best form of praise.
Replies:
Posted By: defective
Date Posted: March 27, 2004 at 8:35 AM
theres too many factors to answer that question..... if you gotta have flat surfaces, use rope as ribs to stregthen it..... the rope will suck up the resin and become hard ribs the brace the area..... or you could just go overkill and layer mat till it's an inch and a half thick...... what is this for?
-------------
Posted By: xtreamcc
Date Posted: March 27, 2004 at 11:10 AM
It's dexterity or ability to support its edges becomes compramised over a flat surface of about 8 inches to a foot (thats what I've found in my experience). To combat a flat surface, defective has the right answer, take some somewhat thick cloth rope (clotheslines work well for this) and soak them in your resin giving them a few minates to become completly saturated. Then lay them accross the flat area. To add more strenght just glass over it which will make a curve in the glass which will be REALLY strong.
-------------
"Shiny chrome when used in conjunction with bikini models is particularly effective in inducing brain deficit disorder"
02 Jeep Grand Cherokee
Monster System on its way.
|