how to attach fg box?

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=29149
Printed Date: May 12, 2025 at 9:33 AM

Topic: how to attach fg box?

Posted By: jboat71
Subject: how to attach fg box?
Date Posted: March 27, 2004 at 11:10 PM

i am ready to start a fg box in my caprice [thanks for all the info] my question is after you build the fg box how do you make it stay in place

thank you

-------------
jboat71

Replies:

Posted By: xtreamcc
Date Posted: March 27, 2004 at 11:48 PM

well, usually I make a base out of MDF and carpet it to match the trunk, then I can just bolt this base down to the body. Thats how I'd do it.

-------------
"Shiny chrome when used in conjunction with bikini models is particularly effective in inducing brain deficit disorder"

02 Jeep Grand Cherokee

Monster System on its way.

Posted By: Meisnera
Date Posted: March 28, 2004 at 2:00 AM

Hi, if you made your box thick enough you should have no problems bolting it down the same way you would with a MDF box.

Posted By: defective
Date Posted: March 28, 2004 at 8:45 AM

i just layer glass till it's too thick and heavy togo anywhere.....grin... not on purpose but thats how it ususally ends up

-------------

Posted By: pureRF
Date Posted: March 28, 2004 at 11:02 AM

Bolt it down.

-------------
dream it, build it, fiberglass it

Print Page | Close Window