Fiberglass confusion

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=29461
Printed Date: August 18, 2025 at 4:24 AM

Topic: Fiberglass confusion

Posted By: Thack79
Subject: Fiberglass confusion
Date Posted: April 01, 2004 at 9:13 AM

To make sure that the fiberglass doesnt come up from hard plastic, I should apply 3M spay glue to the entire panel,wrap the entire panel in fleece/cotton material, then fiberglass? Also would one layer be fine since its nothing being held to it (ie. speakers)? Thanks

Replies:

Posted By: sam1
Date Posted: April 01, 2004 at 10:01 AM

what exactly are you trying to do?

Posted By: Thack79
Date Posted: April 01, 2004 at 11:02 AM

Do a dash, pillar, etc

Posted By: 93accordSE
Date Posted: April 01, 2004 at 11:15 AM

Ruff up the panel with sand paper. Then glass it.

-------------

Posted By: sam1
Date Posted: April 01, 2004 at 12:25 PM

i wouldnt use glue because the resin reacts with it and the glue will stop working. so i wouldnt even bother with glue. id just sand it then brush on some resin to hold the mat or fleece in place, then fg like normal. definately rough it up good and clean it tho to make sure the fg bonds to it.

Print Page | Close Window