custome flip downs

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=29640
Printed Date: May 28, 2024 at 6:01 PM

Topic: custome flip downs

Posted By: Legrones
Subject: custome flip downs
Date Posted: April 04, 2004 at 1:08 AM

i was trying to see how do they get them flip downs to look like the are molded in to the head liner .?

-------------
Dale / Cory

Replies:

Posted By: NowYaKnow
Date Posted: April 04, 2004 at 8:21 AM

Have an example? Link to a picture or anything? Just want to make sure we are thinking on the same lines..

Mike

Posted By: Legrones
Date Posted: April 04, 2004 at 6:19 PM

dont have a link but i see on mtv's pimp my ride the flip down's they do all was look like that...and with that will a flat metal over the head liner hold two flip downs in the back seat or do u find a good glue or silcone that can with stand the heat to hold the wood to the metal skin above the head line thin with the head liner in place drill the flip down to that ?

-------------
Dale / Cory

Print Page | Close Window