Abs plastic 2
Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=29772
Printed Date: August 17, 2025 at 11:52 PM
Topic: Abs plastic 2
Posted By: biznisman2u
Subject: Abs plastic 2
Date Posted: April 05, 2004 at 11:38 PM
Yes, I just bought 2 1 sq ft. of ABS plastics and i was wondering what tool do i use to bend it..... Is it best for me to get a heat gun or a torch, or a micro-therm butane powered heeat gun. or what.. what do any one suggest using to make crazy shapes out of this material like curve ends to fit a dash or something like that???/... and can u cut it with a jig saw.
-------------
Biznisman2u
Replies:
Posted By: Velocity Motors
Date Posted: April 06, 2004 at 1:20 AM
Use a heat gun to bend and use a mini recipricator to cut the shape.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: biznisman2u
Date Posted: April 06, 2004 at 10:21 AM
i've looked in parts express. should i use a mini heat gun or one of those big circle heat guns used for floor mats in construction work........and what is a mini recipricator where can i buy that from and how is it different from a razor cutter... i also wont to know how do i paste these pieces together. in a car and auto mag. they said they super'glued it together. is this good. or should i someway melt the ends together
-------------
Biznisman2u
|