Mold applicaton
Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=29787
Printed Date: August 17, 2025 at 6:05 PM
Topic: Mold applicaton
Posted By: lostboyca
Subject: Mold applicaton
Date Posted: April 06, 2004 at 1:39 AM
is there an application out there where I can mold the shape of my trunk for ease of measures? I want to make a custom box that has all the curves that will fit with the curves on my trunk. Have any ideas please e-mail me at van4375@yahoo.com or reply to post.
Thanks for your help.
Van
Replies:
Posted By: sam1
Date Posted: April 06, 2004 at 11:22 AM
check these sites. this is exactly what i did for my car. easy enough and it saves tons of space. https://www.e-kittan.com/fibre.html https://web.njit.edu/~cas1383/proj/main/
Posted By: drvnbysound
Date Posted: April 07, 2004 at 10:06 AM
I am sure there are quite a few ways it can be done, however the most efficient way I know of is using fiberglass matting, resin, and some mold release wax or PVA (poly-vinly alcohol).
I did not check out those things, but I am guessing they show this process???
If you would like more information from me, contact me via e-mail @ drvnbysound@aol.com
Thanks,
Marvin Peardon
Driven By Sound
www.drivenbysound.net
|