Flush Mounts, but what about tuning?

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=29966
Printed Date: August 18, 2025 at 11:49 AM

Topic: Flush Mounts, but what about tuning?

Posted By: integration20
Subject: Flush Mounts, but what about tuning?
Date Posted: April 08, 2004 at 8:03 AM

I see a lot of flush mounting amps and such and I was curious on you tuned/adjusted them? Or did you tune them before you put them in and have to keep them that way until you want to take everything out and adjust it. I want to flush mount my amps, but I'm worried about adjusting them, and I dont want to make it too easy to get to since I don't want theives stealing them.

My 2 amps are Directed 1100d and Directed 150.

-------------
Integration20

Replies:

Posted By: dangerranger96
Date Posted: April 08, 2004 at 11:16 AM

when you tune your amp, you will want to leave it there unless you want to increase the gain level. so yeah they put in, then they stay like that if you want just a little bit more sound, turn up some bass or treble on your hu, and if you want a little less, turn them down

Posted By: defective
Date Posted: April 09, 2004 at 2:33 PM

or just look at an alpine amp.... all the adjustments are digital and on the front

-------------

Print Page | Close Window