proxy with window mods

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=30388
Printed Date: May 12, 2025 at 10:31 PM

Topic: proxy with window mods

Posted By: mobile1
Subject: proxy with window mods
Date Posted: April 14, 2004 at 9:07 PM

I have a 99 explorer with a clifford rs3.5x. I was wondering if i get window mods and a proxy sensor is there any way i could get the warn away sensor from the proxy to trigger the window mods without setting off the siren, and the full trigger on the proxy to set off the alarm? I saw a post in here that had a diagram for the proxy to set off the window mods, but that would also trigger the siren. I've been racking my brain on this one, so I figured I throw it out there for all of you.

Replies:

Posted By: mobile1
Date Posted: April 14, 2004 at 9:08 PM

I forgot to mention the window mods and proxy are all dei as well. Just in case

Posted By: defective
Date Posted: April 15, 2004 at 9:12 AM

again i'm not a mod, but try asking in the security threads, you will get a faster answer... were all up to our neck in MDF dust and body filler around here. posted_image

-------------

Posted By: robbie2883
Date Posted: April 15, 2004 at 10:49 AM

the proxy sensor should have two negative outputs. one for warn away and the other for full alarm. hook the warn away output of the sensor to the ground input on the window modules. the full alarm output needs to go to a ground input trigger on the alarm. you know, a door trigger or something. and there ya go

-------------
if its jammed force it - if it breaks in the process it needed to be fixed anyway
posted_image

Print Page | Close Window