Print Page | Close Window

Makin’ door panels

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=31870
Printed Date: July 13, 2025 at 4:19 PM


Topic: Makin’ door panels

Posted By: haemphyst
Subject: Makin’ door panels
Date Posted: May 09, 2004 at 7:35 PM

Does anybody know of a good place to look to find hints on building door panels? I've got an '01 Civic, and I want to go three-way in the door, with a Morel 8, a Vifa 3, and an Infinity ribbon tweeter, but I'm gonna have to build panels, and I do not have the foggiest idea how or where to start... Any help at all would be appreciated.

-------------
It all reminds me of something that Molière once said to Guy de Maupassant at a café in Vienna: "That's nice. You should write it down."



Replies:

Posted By: 93accordSE
Date Posted: May 10, 2004 at 1:01 AM
If you are going to build them you are going to have to find out how to get them to match up right and how to make them, if you modify the stock ones you can use them for a structure to build your new ones.

-------------



Posted By: djdaveoc
Date Posted: May 10, 2004 at 2:44 AM
Read through all the posts on this site because many of them are about door panels.  Also, check out the showcars at alpine.com and hzemall.com.  I think there may be some door panel work shown on both those sites.  You may also get other good ideas as well.

-------------
posted_image Plan, Research, Do


Print Page | Close Window