Simple FG Box Project w/Pics

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=31891
Printed Date: July 13, 2025 at 11:52 AM

Topic: Simple FG Box Project w/Pics

Posted By: 93accordSE
Subject: Simple FG Box Project w/Pics
Date Posted: May 10, 2004 at 12:18 AM

posted_image

Weekend project.

Replies:

Posted By: ciscored
Date Posted: May 10, 2004 at 2:59 AM

Nice pics. I have a quick question though, How did you get the excess fiberglass on the edges of the cutouts off so nicely? I'm guessing router with trim bit?? Thanks

Posted By: 93accordSE
Date Posted: May 10, 2004 at 9:01 AM

I used a Dremel with a cutting bit. I am going to have to FG the box so it gradually goes flat on the bottom, top, and sides. I should have more pictures this afternoon.

-------------

Posted By: pureRF
Date Posted: May 10, 2004 at 7:56 PM

Looks good. How are u going to paint or whatever it?

-------------
dream it, build it, fiberglass it

Posted By: 93accordSE
Date Posted: May 11, 2004 at 12:10 AM

I am gradually leveling the bottom, top, and sides. Once that is done I have to sand it ( I ran out of sand paper DAMNIT ), then I am going to primer it and sell it on ebay. I need some money.

-------------

Print Page | Close Window