Print Page | Close Window

Painting Enclosures

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=32142
Printed Date: May 13, 2024 at 10:58 PM


Topic: Painting Enclosures

Posted By: team_outkast
Subject: Painting Enclosures
Date Posted: May 14, 2004 at 11:32 AM

Is primer surfacer sufficient enough(instead of using primer,and then primer surfacer)on a fiberglass enclosure. also was curious how much estimated paint would a guy use on a box around 40x30x16.......and finally how much paint would a guy use to spray a small car like a eclipse(a pint,a gallon,etc?)....i know there are alot of variables but just any idea would be greatly appreciated.......(by the way when i say paint i dont mean spray paint from a can at wal-mart) lol..........thanks Team Outkast



-------------
Team_Outkast



Replies:

Posted By: dangerranger96
Date Posted: May 14, 2004 at 10:10 PM

reshooting the whole car can take gallons not just one but gallons. a ford festiva will take at least 2 gallons if it is shot right


Print Page | Close Window