Round two of the box, and about time

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=33777
Printed Date: July 13, 2025 at 4:18 PM

Topic: Round two of the box, and about time

Posted By: P1atinum
Subject: Round two of the box, and about time
Date Posted: June 12, 2004 at 10:47 PM

It’s been awhile since my last post and I finally got around to doing more work on the box. At this rate I should have the project done sometime, early 2006…… Maybe….

Still have some contour work to do around the EQL and then fill the pinholes. After that I should be good for paint.. I have come to decide I official suck on Paint prep work……..

Front

posted_image

EQL placement

posted_image

Back

posted_image

Amp placement.

posted_image

Just think I still have the door pods to do.. (They are covered with vinyl shouldn’t take to long), The tweeter pods. (Textured to match the interior molding). And the dash to fit the 4.1 and the deck) At least that is the easy work.

More to come……eventually.

P1atinum

Replies:

Posted By: mikedawg
Date Posted: June 17, 2004 at 10:51 PM

looks pretty good. sanding is the hardest part

-------------
always looking for new info and willing to give it

Posted By: iceknights2000
Date Posted: June 21, 2004 at 2:42 PM

Box is looking great. What type of material are you useing for filler? Looks like you have been priming, not sure if you have tryed used a heavy spray filler. Stuff works great for smoothing off the "close to end parts". I use this stuff all the time. and it works great.

Just a thought.

Ice Knight