Dynamat help?

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=34148
Printed Date: April 29, 2024 at 2:32 AM

Topic: Dynamat help?

Posted By: Dragorus
Subject: Dynamat help?
Date Posted: June 18, 2004 at 11:17 PM

This will be my first attempt at dynamatting my interior and need some suggestions / tips.......Where should I put the dynamat? and how much or thickness should i use.....Also is the spray stuff good for doors and places you can't get a sheat of dynamat in?

Thanx

Replies:

Posted By: pureRF
Date Posted: June 19, 2004 at 10:05 AM

Spray stuff is great for anywhere but you need a gun. Just start with places that would seem they need the mat the most.(doors,large flat areas,etc.) You will only need one layer.

-------------
dream it, build it, fiberglass it

Posted By: bLACKKNIGHTPRES
Date Posted: June 23, 2004 at 8:33 PM

ANY place where the body panels would shake.. the doors FOR A MUSt! underneath the skins.. the interior quarter panels.. if you have extra.. or you want to go to extreme.. do the floors under the carpet... and the ceiling.. lol but thats alot of work! for your trunk.. Do the WHOLE thing! you will thank yourself for listening to me.. to the actual lid as well... It all depends on how much bass you think your system will kick out!

-------------
BlacK KnighT RacinG

Posted By: defective
Date Posted: June 24, 2004 at 7:35 AM

if you need help with dynamat, you shouldn't be driving a car..... posted_image

-------------

Posted By: Dragorus
Date Posted: June 24, 2004 at 11:34 AM

defective wrote:

if you need help with dynamat, you shouldn't be driving a car.....

Why would I drive I'm only 12...lol

Print Page | Close Window