Print Page | Close Window

which is better?

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=34879
Printed Date: May 14, 2024 at 8:29 AM


Topic: which is better?

Posted By: Xplorer
Subject: which is better?
Date Posted: June 30, 2004 at 9:36 PM

Hey,

     I am about to install a couple of 12's in a sealed enclosure and was wondering how to run my wiring to the 2 subs. I was gonna wire the subs in parallel (4Ohms each <-> 2Ohm load)and wanted to know if i should make a small hole in the back of the box , run the speaker wire , then hot glue gun it so it is air tight OR should i just buy a terminal , install the terminal to the back of the box , and then connect the wire to that. Does it matter which way i do it? Also does it matter what gauge wire i use?

Thanks



-------------
Peace



Replies:

Posted By: dangerranger96
Date Posted: July 01, 2004 at 12:06 AM
use some silicone caulk instead of hot glue it seals better



Posted By: CarAudioHelp
Date Posted: July 03, 2004 at 12:35 PM
Spend a buck and get the terminal cup or a nice set of binding posts. Much more professional and reliable.

-------------


Print Page | Close Window