Bondo and Fiberglass

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=35462
Printed Date: July 15, 2025 at 9:03 PM

Topic: Bondo and Fiberglass

Posted By: 94legend
Subject: Bondo and Fiberglass
Date Posted: July 12, 2004 at 1:28 PM

I have alot of gaps between the bumpers of my car. I am very new to the material "bondo" and how to apply it to the car.

Also the front bumper is does not have a mesh grill.

I bought one and would like to install it to the front bumper. the front bumper is very fragile. i would have just used a washer and screw. but i am afraid that it will just crack the front bumper.

What kind of solution can i use to attach the grill to the bumper?

Thanks for your support!

Replies:

Posted By: defective
Date Posted: July 12, 2004 at 1:41 PM

i drill small holes and use zip-ties. They are flexable and can be tightened to yourliking, andit just a takes a pair of pliers to remove them.

-------------

Posted By: 94legend
Date Posted: July 13, 2004 at 2:52 PM

defective wrote:

i drill small holes and use zip-ties. They are flexable and can be tightened to yourliking, andit just a takes a pair of pliers to remove them.

Excellent Idea, I'll see what i can do. Thanks alot.

also what about the gaps between my body kit and car?

I'll have my good friend install my front mesh grill

-------------

Print Page | Close Window