Checklist
Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=36330
Printed Date: May 10, 2024 at 2:50 AM
Topic: Checklist
Posted By: saj2k
Subject: Checklist
Date Posted: July 28, 2004 at 2:45 PM
I know you guys have prolly heard this question a lot but i need a checklistof things to buy. I am going to order for US composites but i am not sure what to get, ie the resins or mats. I need enough to make four 1 cubic sub enclosures and two amps racks. thnks
-------------
If it's not oringal, it's not worth doing.
Replies:
Posted By: saj2k
Date Posted: July 29, 2004 at 5:39 PM
Ok i figured i am going to get the 2 oz. of chop strand mat but i don't know how much i'll need. I am still not sure what resin to get, and i'll stick with fleece for laying over the mold.
-------------
If it's not oringal, it's not worth doing.
Posted By: pimpgtivr6
Date Posted: July 29, 2004 at 6:31 PM
the best thing to do for your first box (or first couple)...BUY FROM HOME DEPOT. so when you run out..or if your in a pinch..you can run over and buy it quick. If you plan on doing it all "organized" and layed out your first time..your gonna screw up. so just buy everything you need at home depot..and spend an extra maybe 20 bucks to know that you have all the products at your disposal..my 2 cents
until you get the basic idea of how much it takes for materials you should use local places. After my first 3 enclosures i could kinda gauge how much materials i need on an average..its not worth the time to sit around and organize it..just buy a whole mess load of stuff and do it up.
Nick
|