Print Page | Close Window

first FG project Success! trunkthumper

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=38680
Printed Date: May 17, 2024 at 1:27 PM


Topic: first FG project Success! trunkthumper

Posted By: King_Midas
Subject: first FG project Success! trunkthumper
Date Posted: September 06, 2004 at 2:01 PM

posted_image

lots of fun, took a bit more time than I would have liked. the amp on top is powering the two sides and there's a rockford underneath the trap door that powers the Clarions.



Replies:

Posted By: r0yal
Date Posted: September 06, 2004 at 3:39 PM
Good job... I think it would have looked a little better painted the same color as the exterior, but thats my .02




Posted By: King_Midas
Date Posted: September 06, 2004 at 4:21 PM
yea I agree. I was just in a hurry to get it all painted up for a show but I didn't have enough silver left from the paint shop and it costs $25 a can. I had lots of the orange left over from rebuilding my old tractor so I unloaded 3 cans of plasti-kote over them.

sidenote: the car was in an accident on friday so I may end up putting them in another car anyways



Posted By: Rick James
Date Posted: September 07, 2004 at 4:09 PM

Does it sound OK with the 2 different brand subwoofers?



-------------
What did the five fingers say to the face?



Posted By: King_Midas
Date Posted: September 07, 2004 at 4:47 PM
yep, but if I want to keep it down I have a pair of toggle switches up front


Print Page | Close Window